Free Delivery


How to make your own Flood & Drain table



Although GroTec reccommends that you buy a complete Flood & Drain system, we do know that sometimes you need to build your own.

Equipment needed.

Method.

  1. Drill two holes in the deep garden tray to the size of the valves, attach some 16mm pipe to the inlet valve.
  2. Place Garden tray over the tank and attach the pipe to your pump.
  3. Fill the tank with water and the tray two thirds full with clay pebbles.
  4. Set the segment timer to come on 15 mins every 4 hours (this is for young plants, increase the timings as the plants get older and need more food. See our Flood & Drain article).

That is essentially it, just make sure you place your rockwool cubes/pots so that they are not submerged completely during the flood cycle.



Products Associated With This Article
 
Canna pH Stable Clay Pebbles flood and drain
Large DIY Flood & Drain Tray
Valve for Flood & Drain
Pipe and tubing per metre
15 min on/off segment timer
Maxi Jet Water Pumps Best Seller